Winter-proof through the cold season
Tips for operating and decommissioning cooling towers Cooling towers are indispensable components of many industrial processes. They ensure efficient cooling and make a significant contribution to the functioning of entire systems. However, in winter in particular – when temperatures drop and there are potential periods of frost – special care is required. Whether in […]
Effective water treatment in the hot rolling mill
Customized solutions for better water quality in the rolling process Our customer, the operator of a hot rolling mill, had persistent problems with turbidity in the circulating water and a high particle density, which consisted mainly of sinter. The rolling process adds a lot of particles and contaminants to the water, an unavoidable process […]
Wastewater treatment with special dispersion polymers
Wastewater treatment with special dispersion polymers In addition to the INWATROL experts for breweries, INWATEC offers special wastewater products that meet the needs of the food industry (including breweries and dairies). Particularly notable is the diversity of dispersion polymers, which can be used especially in breweries or other food processing industries. A dispersion polymer […]
Reducing the cleaning frequency in pasteurizers
Reducing the cleaning frequency in pasteurizers Biofilm in process water and equipment can lead to a variety of problems, including clogging of pipes, corrosion of equipment and devices, and the formation of unwanted bacteria and microorganisms. It is therefore important to monitor biofilm continuous to prevent fouling and maintain process efficiency. Monitoring biofilm allows […]
INWATEC presents INWArun 4water 2024
Run with us for clean water and more donations! After the successful first INWArun 4water last year, INWATEC GmbH & Co. KG is proud to present the charity run again this year. As an expert in the chemical water treatment of industrial water, we are not only concerned about efficiency in industry, but also about […]
Oxygen measurement in the feed water
Oxygen measurement in the feed water INWATEC recently carried out an oxygen measurement in the feed water at a customer’s site. The aim of the measurement was to check the function of the deaerator from the feed water tank. Oxygen measurement in the feed water is a crucial step in ensuring the efficiency of deaerators […]
Wastewater treatment in dairies
Wastewater treatment in dairies Wastewater from dairies has a high pollution load. Chemical treatments can be used to remove solids and organic substances. A key method in this process is flocculation. What is flocculation and why do I need it? Flocculation is a process that aims to combine the smallest particles in wastewater into larger […]
INWArun 4water – We say THANK YOU!
THANK YOU for the numerous positive feedback on our fundraiser. The first INWArun 4water is now over. We would like to thank all participants for their contribution to our fundraising run for Viva con Agua. Everyone ran hard and we would like to especially highlight the highest distance of 36.8km. What an effort – […]
Cooling water recycling
Overcoming technical and economic hurdles in the treatment of wastewater from industrial cooling plants: The treatment and desalination of technical process water and the reuse of the treated water is initially technically implementable without further problems. In practice, conventional treatment plants require a large amount of space due to the combination of several treatment […]
The wastewater concept of the future
The wastewater concept of the future INWATEC GmbH & Co. KG works innovatively and creatively on current environmental topics, primarily to save resources and CO2 and thus contribute to climate protection. Through our long-standing and trusted customer contacts, we are called upon as a partner for optimization and savings potential in the areas of […]